|
|
DS|POWER DS300 UPS SERIES
3/3 Uninterruptible Power Supplies
10kVA - 15kVA - 20kVA - 30kVA - 40kVA - 60kVA - 80kVA - 100kVA - 120kVA - 160kVA
The new DS Power range UPS uses the latest DSP technology to be programmed to suit a wide variety of electrical environments without impending its performance. With the DS Power range, efficiency, reliability and functionality are enhanced to levels unattainable with the old analogue technology.
This technology does not only create significant increase in MTBF, but the capability of DSP to accurately manipulate signals at very high speed permits all the UPS subsystems to be controlled with greatly increased precision.
300 series, Uninterruptible Power Supplies Series which are produced with PWM (Pulse Width Modulation) and IGBT technologies, microprocessor controlled, full sine output, ONLINE, parallel connection.
The 300 Series feeds and protects UPS systems, advanced local networks, communications systems, precision medical devices, intelligent engineering measuring instruments and industrial automation systems.
|
GENERAL SPECIFICATIONS
- • Transformerless UPS topology
• Low input current total harmonic distortion (THD)
• High input power factor
• High efficiency up to 94%
• Cold start function
• Static and maintenance by-pass switch
• Output short circuit and overload protection
• External REPO switch input
• 192 events memory (192 events 4500 alarms)
• Clock and calender (battery supported)
• Automatic battery test,remaining battery time indicator
• Temperature compansated charge system
• Regenerative backfeed function
• 2 RS232 serial ports and 12 dry contact outputs
• 3 DSP controlled modular structure
• Optional SNMP and MODBUS adaptors
• Optional graphical panel
• Optional usb flash memory
• 2 years warranty
• 10 years spare parts support
• Manufactured according to EC Directive; EN62040
• Full digital structure
• Small footprint
• Ecomode operation
• Fewer electronic components
• Output current limiting
• Advanced diagnostics for the input
• Selectable input/output coltage/frequency/range
• Split by-pass input (second input)
• Output DC leakage protection
• Seperate DSP for inverter control
• Seperate DSP for the PFC
• 3 level battery protection
• High charge current capacity
• Charge/discharge current indicator
• Advanced remote control features
10 year spare parts support
EC according to EN62040 directive.
Fully digital structure
Small footprint
Economy Study
Fewer electronic components
Output current limitation
Advanced control at entry
Selectable input / output voltage / frequency range
Split by-pass input (second input)
Output DC leakage protection
Separate DSP for inverter control
Separate DSP for PFC
3-level battery protection
High charge current capacity
Charge / Discharge current indication
Advanced remote control features
|
|
|
MODEL |
DS310 |
DS315 |
DS320 |
DS330 |
DS340 |
DS360 |
DS380 |
DS3100 |
DS3120 |
DS3160 |
Power (kVA) |
10 |
15 |
20 |
30 |
40 |
60 |
80 |
100 |
120 |
160 |
INPUT |
Voltage |
380/400 VAC 3P + N + G ± 20% (415 VAC +15%, - 25% optional) |
Frequency |
50Hz / 60Hz, ± 5% |
Power factor |
≥ 0.99 |
(THDI) (*) |
≤ 3% |
By-pass voltage |
380/400 VAC 3 Phase + N , 4 Wires, ± 10% |
Voltage distortion |
≤ 10% |
Protection |
Fuses, Voltage & Frequency tolerance, Input power limit, Phase sequency indicator |
OUTPUT |
Power (kW) |
9 |
13,5 |
18 |
27 |
36 |
54 |
72 |
90 |
108 |
144 |
Power factor |
0,9 |
Voltage |
380/400 VAC 3 P + N , ± 1% (415 VAC optional ) |
Frequency |
50Hz / 60Hz |
Frequency tolerance |
Line synchronized: ± 2% / Free running: ± 0,1% |
Efficiency |
up to 94% |
Crest factor |
3:1 |
Overload protection |
100% - 125% load: 10 min, 125% - 150% load: 1 min, - > 150% load: by pass |
Other protections |
Advanced short circuit, Voltage tolerance, DC balance, Regenerative load, Current limiting |
Voltage THD |
< 3% (at 100% linear load) |
BATTERIES |
Type |
VRLA AGM / GEL / NiCd |
Nominal voltage |
± 360 VDC |
Float / End of discharge voltage |
± 405 VDC / ± 300 VDC |
Battery cabinet |
Internal |
External |
Battery ambient temperature |
25ºC |
Protections |
3 level alarms, Battery fuses, Charging current limit, Temperature compensation (optional) |
Automatic testing |
Standard every 72 hours (adjustable) |
GENERAL |
Standards |
EN62040-1, EN62040-2, EN62040-3 |
User interface |
4 lines LCD panel, Mimic leds, 5 vector buttons, Buzzer, Optional TFT panel |
Indicators |
P-N voltage, P-P voltage, Current, Power, Crest Factor, Frequency, PF, Service Time |
Advanced |
Self diagnostics, 3 maintenance time indicators, Calibration over RS232,operating hour meter |
Communication |
2xRS232 serial ports, 4 standard and 8 optional DRY contact alarm relays |
Inputs |
EPO input, Interactive battery panel input, Genset input |
Genset kit |
Standard (programmable) |
Software |
Standard T-Mon UPS Management Software (3 clients + 1 server management) |
Alarm logging |
Standard: with time & date 512 events |
Protections |
Power module over-temperature, Over current, Temperature high alarm |
Temperature range |
0ºC - 40ºC |
Protection degree |
IP20 |
Relative humidity |
90% max. (non-condensing) |
Altitude |
< 1000m above sea level |
Acoustic noise |
< 57 dBA |
< 62 dBA |
< 64 dBA |
< 68 dBA |
Weight without batteries (kg) |
87 |
87 |
91 |
100 |
173 |
197 |
209 |
220 |
232 |
265 |
Dimensions (mm) HxWxD |
1040x400x815 |
1440x515x855 |
OPTIONS |
Different input / output voltage |
Please ask |
Transformer |
Galvanic isolation transformer at the input & output |
Software |
T-Mon Admin Multi UPS monitoring 10-50-100-200 clients, T-Mon Server 50-100-200 clients |
Adaptors |
SNMP, RS485, Remote monitoring panel, MODBUS (RS485 or TCP/IP), USB Alarm Logger, TCP/IP ,GSM/GPRS Modem, Comport multiplexer |
Parallel operation |
up to 8 |
(*) Depending on power and input/output conditions |
|
|